Filter
Top Products
10
REMOTE PANIC (Used only with Optional HORN HONK feature installation)
For personal safety this unit now includes a panic feature. To sound the vehicle car horn, press the Lock Button on the
remote for more than 2 seconds. The vehicle horn will honk along with flashing parking lamps for 1 minute. Reset
Remote Panic by pressing either the lock or unlock button. See next section for Horn Honk information.
HORN CHIRP/HONK OUTPUT (Optional: with Horn connection & programming)
This feature, if installed, will provide audible confirmation chirps from the factory horn for lock and unlock. When using
this feature, pressing the Lock/Unlock button a 2
nd
time within 3-7 seconds or single press lock/unlock will provide a
horn chirp for audible confirmation. The system can also be programmed to provide 3 chirps when a remote start is
requested using the remote. Note: Horn honk/chirp feature may require extra labor and/or parts to install.
REMOTE TRUNK RELEASE OR DOMELIGHT ILLUMINATION (Optional)
This EZEESTART system includes an output that can be programmed to remotely release a factory electronic trunk or
illuminate the interior light when you unlock your vehicle for lighted entry at night. If you have the optional trunk pop
installed, simply press and release the Trunk Button #3 on the transmitter or if option # 6 is turned on you must press
Button # 3 twice within 3 seconds, to remotely open trunk. If your system is programmed for Dome Light illumination,
then it will work automatically lighting the dome light for 30 seconds when you unlock your vehicle via the remote. The
dome light will turn off after 30 seconds, or turning the key on (whichever comes first). The trunk Pop or Dome Light
Illumination may require extra labor and/or parts to install.
CONVENIENCE AND SAFETY FEATURES
VALET MODE / STARTER DISABLE OVERRIDE
Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into valet
mode. The remote start function WILL NOT operate when in Valet mode. To enter Valet mode, turn the key
to the ON position, press and hold Program/Valet switch for 5-6 seconds. The LED will turn on solid and the
system is now in valet. Perform this procedure again to exit of Valet mode. The keyless entry will still function
normally while in valet mode. In the event of a lost or broken transmitter, perform this step to override the
Starter Disable (if installed).
ANTI-GRIND / STARTER DISABLE (Optional, relay not included)
This Optional feature prevents the user from accidentally grinding the starter if the Ignition key is turned too far to the start
position while engine is already running from the remote starter. The Anti-Grind/Starter Disable requires the use of an external
relay. This system must be programmed to allow the relay to work as a starter disable.
Driver’s Door Priority For RS-55DP only (Optional, additional part may be needed.)
When using the optional separate driver’s and passenger unlock function, press and release button #2