Filter
Top Products
41
“MENU/OK” to select Delete All. The display will show “Are You Sure?”.
Press “MENU/OK” to delete all Phone Book entries. Press “CANCEL” twice
to return to the idle state.
5.8.2 Speed Dial
To access Speed Dial, press the “PHONE BOOK” button, the display shows
1.Phone Book 2.Speed Dial. Press “DOWN” and then press “MENU/OK.”
The display now shows the ten speed dial locations M1 through M10. The
information in these buttons may be viewed or changed.
5.8.2.1 Speed Dial – View Settings
After accessing the Speed Dial, use the UP or DOWN key to select the desired
memory location, then press “MENU/OK” twice. The display will now show
Current Setting= XXXXX where XXXXX is the name stored in this location.
Press “CANCEL” four times to return to the idle state.
5.8.2.2 Speed Dial – Change Settings
After accessing the Speed Dial, use the UP or DOWN key to select the desired
memory location, press “MENU/OK”. Then press the “DOWN” key. Then
press “MENU/OK.” The display will now show a listing of names stored in the
phone book. Select the information to be stored and press “MENU/OK.”
Press “CANCEL” three times to return to the idle state.
6 Attachment
6.1 H.323 Interoperability List
The followings devices that have been tested to be interoperable with the 2747 IP
Phone.
- Client/Terminal
Microsoft NetMeeting, Version 3.01
OpenH323 Phone, Version 1.6.0
WellTech, LANPhone 101
Sagitta IP Phone
RadVision H.323v4 Protocol Stack (IMTC 2002)
Leadtek Research Inc., BVP8770 Video Phone (IMTC 2002)
Sony Electronics, PCS-6000 / PCS-1600 (IMTC 2002)
Aethra Srl (Italy), Vega Pro (IMTC 2002)