Filter
Top Products
19
3 Configuration from Keypads
The VOIP 2747 series IP Phone is designed to be installed easily and is very
user-friendly so almost all the configurations can be done through the keypad and
LCD screen display on the phone set in a few minutes. In order to make a VoIP
call, please configure through the keypad as described in the following few
sections:
Notice:
(1). When needing to input a character in any menu item, please press that key
button quickly to switch between different characters to set the correct one.
(2). When the input mode is in digit mode (you can only input ‘0’ – ‘9’ and ‘*’,
‘#’), and you want to input a character, please press “TXT
←→ NUM” key
first to toggle to “character” input mode.
3.1 Network Configuration
The first step in using the VOIP 2747 IP Phone is to set the network
configuration to let the IP Phone connect to internet. This step depends on
your network environment and phone models, so please use the proper
method in configuring the IP Phone for your internet connection.
3.1.1 Dynamic IP Method (DHCP)
Most of the network environment in an office, hotel room or at home is
under a NAT (IP sharing)/router device. Under this environment, the easiest way
to connect to internet is using DHCP. The IP Phone, when configured using the
following method, will get the IP parameters dynamically, and connect to the
internet automatically.
Configure ► Password：135 ► Network ► (Yes/No) Dynamic IP
Please press “ok” key to set Yes on (Yes / No) Dynamic IP when using
DHCP.
Most cable modem connections also use DHCP.