Filter
Top Products
After the adapter is connected, the display will show as indicated below for setting.
1. [SELECT LANGUAGE] appears on the display. Press the REVIEW UP ( )
button to select the language. Eng - English, ESP - Spanish, FRE - French, and then
press the MENU button to confirm the selection.
2. When [STUTTER TONE] appears, the default setting is “No”. To toggle stutter
tone, press “1” for Yes or “2” for No. Press MENU to confirm selection.
3. When [ENTER AREA CODE] appears, enter the desired area code using the
keypad. Use REVIEW UP ( ) button and REVIEW DOWN ( ) button to skip a
digit. Press the MENU button to confirm area code. Follow the same procedure
for all 6 area code settings. To leave an area code blank, press MENU without
entering digits.
4. When [SET LDS CODE] appears, enter the desired LDS code using the
keypad. Press MENU to confirm the selection. The code can range from _ to
9. The Access Code is used to obtain an outside line when using a PBX and
some Centrex applications. This feature can be used with Caller ID and Memory
Locations.
5. When [EDIT TIME & DATE] appears, enter the time using the keypad, press the
REVIEW UP ( ) button and REVIEW DOWN ( ) button to select AM or PM.
Enter the date using the keypad. Press MENU to confirm the settings.
Example: To enter 8:35 AM, enter 0835 and then press the REVIEW UP ( )
button to skip to the date because the time is AM by default.
6. When [FLASH TIMER (MS)] appears, press the REVIEW UP ( ) button to toggle
between 600ms, 100 ms, and 300ms. After selecting the desired flash time, press
the MENU button to confirm selection.
7. When [RINGER CADENCE] appears, the default setting is 3. To alter this setting,
press the REVIEW UP ( ) button, there are 5 ringer cadences and each one will
be played as you scroll through them. After the desired ringer cadence is dis
played, press MENU to confirm selection.
8. When [RINGER VOLUME] appears, the default setting is 5. To alter the
ringer volume, press the REVIEW UP ( ) button, there are 7 ringer volume levels
and each one will be played as you scroll through them. To turn the ringer off,
select OFF in the Menu. After the desired ringer volume level is displayed, press
MENU to confirm selection.
9. When [VOICEMAIL NUMBER] appears, enter the voicemail number (maximum of
18 digits) using the keypad. To delete a number or digit, press the REVIEW DOWN
( ) button to erase the number(s). After the desired number has been entered,
press MENU to confirm selection.
10. When [#3 SEC PAUSES] appears, enter the desired number of pauses using the
keypad. After the desired setting has been entered, press MENU to confirm selec-
tion.
11. When [VM PASSWORD] appears, enter the desired password using the keypad
(maximum of 4 digits). To delete a number or digit, press the REVIEW DOWN ( )
button to erase the number(s). After the desired number has been entered, press
MENU to confirm selection.
4