Filter
Top Products
9
OPERATION
TELEPHONE
1. Make a Call - Pick up the handset or press
to get
dial tone and dial the number. When the called party
answers, the LCD will time the call automatically.
2. Answer a Call - Pick up the handset or press
to
answer a call.
3. End a Call - Hang up the handset or press
to end a
call.
4. Switch Handset to Speakerphone - Press
and then
hang up the handset to talk through the speakerphone.
5. Switch Speakerphone to Handset – While on a
Speakerphone call, pick up the handset and the talk mode
will switch automatically.
6. Hold
a. Handset – While off-hook with the handset, press HOLD
and the call will be muted. The LCD will say MUTE ON.
You can still hear the other party, but the other party
cannot hear you. Press HOLD again to return to the call.
When the handset is hung up, the call is placed on HOLD
and the IN USE/NEW LED flashes. Pick up the handset
again to return to the call or press to return to the call in
speakerphone mode.
b. Speakerphone – While off-hook with the speakerphone,
press HOLD and the call will be placed on HOLD. Press
HOLD or to return to the call in speakerphone mode.
Pick up the handset again to return to the call in handset
mode.
7. Flash - This function is used for transfer on most PBX
systems and also for call waiting service from the telephone
company.
8. Pre-dial – While on-hook, dial the phone number and then
pick up the handset or press
. The number will be
dialed automatically.