Filter
Top Products
6
INSTALLATION
Batteries
1. Open the battery compartment.
2. Install 4 AA batteries.
Notes: The batteries are only necessary for the clock function.
They should be replaced every 6 months. Replace all 4
batteries. Observe the polarity when installing batteries.
Disconnect the phone from the line before installing
batteries.
Desk Mount
1. Connect one end of the coiled cord to the jack in the handset
and connect the other end to the handset jack in the base.
2. Plug one end of the line cord to the line jack in the base and
connect the other end to the wall jack.
Wall Mount
1. Connect one end of the coiled cord to the jack in the handset
and connect the other end to the handset jack in the base.
2. Plug one end of the short line cord to the line jack in the
base. Route the cord through the slot in the wall mount
wedge, and connect the other end to the wall jack.
3. Install the wall mount wedge in the 4 holes in the base of
the telephone (or rotate 180° to elevate angle of phone in
desk mount position).
18. Message Waiting Switch – Choose different forms of message
waiting.
19. Line Cord Jack - Connects telephone to telephone line.
20. DATA PORT (RJ11) - Used to connect phone to a computer or
modem.
21. Handset Jack
22. 2.5 mm Headset Jack