Filter
Top Products
10
9. Pause - Press REDIAL/PAUSE to insert a pause in a speed
dial number.
10. Redial
a. Last Number – Go off hook. Press REDIAL/PAUSE and
the last number dialed will be dialed out.
b. Review – While on-hook press REDIAL/PAUSE repeatedly
to review the last 16 dialed numbers. When the desired
number is displayed, go off hook and it will be dialed.
11. Auto Redial – With the phone on-hook, press AUTO RD to
auto redial the last dialed number. If the line is busy when
using the monitor, the phone will automatically redial the
number up to 15 times.
12. One-Touch Speed Dial Memories:
a. STORE - With the phone on-hook, press STORE, then
input the phone number you wish to store (up to 32
digits). Then press the desired one-touch memory key
(M1 – M10).
b. DIAL - Go off hook and press M1 ~ M10 to dial the
stored phone number automatically.
CALLER ID
1. Caller ID Review – While on-hook, press CLID or CLID
to review the caller’s phone number and the call time.
2. Delete Caller IDs
a. Press CLID
or CLID to find the call you wish to
delete. Press DEL/SET once quickly to delete a single
call.
b. Press CLID or CLID until a Caller ID record is
displayed. Press and Hold DEL/SET for 3 seconds to
delete all calls.
3. Call Back from the Caller IDs – While on-hook, press CLID
or CLID to select the number you wish to dial. Press
CALL BACK and the number will be dialed. If you have set up
LOCAL CODE and PREFIX, press CALL BACK twice to add a
prefix and area code.