Filter
Top Products
7
INSTALLATION
Desk Mount
1. Connect one end of the coiled cord to the jack in the handset and
connect the other end to the handset jack in the base.
2. Plug one end of the line cord to the line jack in the base and
connect the other end to the wall jack.
Wall Mount
1. Connect one end of the coiled cord to the jack in the handset and
connect the other end to the handset jack in the base.
2. Plug one end of the short line cord to the line jack in the base.
Route the cord through the slot in the wall mount wedge, and
connect the other end to the wall jack.
3. Install the wall mount wedge in the 4 holes in the base of the
telephone (or rotate 180° to elevate angle of phone in desk
mount position).
MESSAGE WAITING SETUP
The 8780 Message Waiting switch (see Item 22 for location) provides 4
positions for different types of message waiting compatibility with a
wide variety of message waiting sources. See the descriptions below to
choose the switch position for your type of Message Waiting.
1. SR – Use this setting if you have FSK message waiting. This is
the type of MW that is usually provided by the telephone
company.
2. HV – Use this setting if your MW is 90V. This is usually provided
by a PBX.
3. PR1/PR2 – Use one of these settings if your MW is provided by
an Avaya or Siemens PBX with this special function. Usually PR1
will function with Avaya and PR2 will function with Siemens.
FUNCTION SETUP
1. Set the Language – While on-hook, press and hold DEL/SET for
3 seconds to enter LANGUAGE SETUP. Press CLID to select
the language. Press DEL/SET to confirm. The 8780 supports 10
languages: English, French, Spanish, Portuguese, Polish, Italian,
Swedish, German, Dutch, and Turkish.
10
11. Auto Redial – With the phone on-hook, press AUTO RD to auto
redial the last dialed number. If the line is busy when using the
monitor, the phone will automatically redial the number up to 15
times.
12. One-Touch Speed Dial Memories:
a. STORE - With the phone on-hook, press STORE, then
input the phone number you wish to store (up to 32
digits). Then press the desired one-touch memory key
(M1 – M10).
b. DIAL - Go off hook and press M1 ~ M10 to dial the
stored phone number automatically.
CALLER ID
1. Caller ID Review – While on-hook, press CLID or CLID to
review the caller’s phone number and the call time.
2. Delete Caller IDs
a. Press CLID or CLID to find the call you wish to
delete. Press DEL/SET once quickly to delete a single
call.
b. Press CLID or CLID until a Caller ID record is displayed.
Press and Hold DEL/SET for 3 seconds to delete all calls.
3. Call Back from the Caller IDs – While on-hook, press CLID or
CLID to select the number you wish to dial. Press CALL BACK
and the number will be dialed. If you have set up LOCAL CODE
and PREFIX, press CALL BACK twice to add a prefix and area
code.
4. VIP Number
a. While on-hook, press CLID or CLID to select a number
you wish to set as a VIP number. Press VIP and the
number will be set as a VIP number.
b. To remove VIP designation, simply press VIP again while
the number is displayed.