Filter
Top Products
586002TP227F User’s Manual 17
Select Base
If you have registered a Handset to more than one Base, use this feature to select the Base to which you currently
want to ‘link’ that Handset (a Handset can be registered to a maximum of 4 Base Units; however, it can only work with
one Base at a time):
In the Advanced Settings menu, scroll ▼ to >Select Base, and then press Menu/OK.
You will see a list of a Base Units to which the Handset is registered. You will also see >Automatic. Scroll ▲/▼ to a
specific Base or Automatic, and then press Menu/OK.
If you choose >Automatic, the Handset will search for all Bases to which it has been registered. If it locates more than
one Base, the Handset will select the one to which it has been most recently registered.
Deregister - Handset
From a registered Handset, you can deregister any Handset. The Base will no longer recognize the deregistered
Handset:
In the Advanced Settings menu, scroll ▼/▲ to >Deregister?, and then press Menu/OK.
Enter the HS PIN: ____.
You will see Deregister >Handset. Press Menu/OK.
Scroll ▲/▼ to select the desired Handset, and then press Menu/OK.
You will see Clear ? Scroll ▼ to >Yes, and then press Menu/OK to confirm.
Press DEL/Mute twice to return to the idle screen.
Deregister – Base
From a registered Handset, you can deregister that Handset from one or more Bases to which it is currently linked:
In the Advanced Settings menu, scroll ▼/▲ to >Deregister?, and then press Menu/OK.
Enter the HS PIN: ____.
You will see Deregister. Scroll ▼ to >Base. Press Menu/OK.
You will see Select Base. Scroll ▲/▼to a desired >Base, and then press Menu/OK.
A check mark will appear by each Base you select for deregistration.
Press Menu/OK again. You will see Clear? Scroll ▼ to >Yes, and then press Menu/OK to confirm.
Press DEL/Mute twice to return to the idle screen.
23 Base Settings
The Base Settings menu gives you access to the following options:
AUDIO – Base Ringer Volume and Melody
RESET BASE – To all factory preset settings
ADDITIONAL – Dial Mode; Flash Time; Prefix Dial No.
CALL BARRING – Prevent unauthorized use of your phone
BASE PIN – Change Base PIN (default PIN is 0000)
To access these options, from the idle mode:
Press Menu/OK, and then press ▲ or ▼ until you see >Base Settings.
Press Menu/OK again. Press ▲ or ▼ to choose from the list of options above.
Audio
When you see >Audio, press Menu/OK, and then press ▲ or ▼ to select >Ringer Volume or >Ringer Melody.