Filter
Top Products
586002TP227F User’s Manual 16
PART III ADVANCED SETTINGS
22 Advanced Settings Menu
The Advanced Settings menu gives you access to the following options:
RESET HANDSET
CHANGE PIN
REGISTER
SELECT BASE
DEREGISTER
To access these options, from the idle mode:
Press Menu/OK, and then press ▲ or ▼ until you see >Adv. Settings.
Press Menu/OK again. Press ▲ or ▼ to choose from the list of options above.
Reset Handset
To restore your Handset to all factory preset settings:
When you see >Reset handset, press Menu/OK.
Your will see Enter HS PIN: :____.
Enter the 4-digit Handset PIN (preset to 0000).
Scroll ▼ to >YES, and then press Menu/OK.
Change Pin (Handset)
Your Handset PIN is factory preset to 0000. To prevent unauthorized adjustment of the advanced Handset settings,
you can select a new 4-digit PIN (this is optional; you do not have to change the PIN):
Scroll ▼ to >Change PIN, and then press Menu/OK.
Your will see Enter Old PIN :____.
Enter the current 4-digit Handset PIN.
Enter the New Pin :____.
Verify the New Pin :____. You will see Pin Changed.
Press DEL/Mute twice to return to the idle screen.
Registration (of Handsets)
Your Handset is registered to the Base at the factory. Registration allows a Handset to communicate with a Base. You
can register 5 additional Handsets (model
588002TP227F) to the Base. To register an additional Handset to the Base:
Auto Registration (Recommended)
Charge the ‘new’ Handset in its cradle overnight. You will see Not Registered on the display. Place it in the Base.
In a short while, usually 60 seconds or less, the new Handset will be registered. The Handset will be assigned a
number, located in the lower left corner of the display.
Manual Registration
Press and hold PAGE on the Base (for approximately 3 seconds) until you hear a soft beep.
In the Advanced Settings menu, scroll ▼ to >Register, and then press Menu/OK.
You will see Select Base. Scroll ▼ to the desired Base. If you have one Base, scroll ▼ to >Base 1. Press
Menu/OK again.
You will see Please Wait… When prompted, Enter Base PIN: :____.
You will see Please Wait… A tone will confirm registration. The idle screen will be displayed.