Filter
Top Products
586002TP227F User’s Manual 14
service providers can provide this notification service. There are fees associated with this feature. Contact your service
provider for details.
After receiving a ‘new message’ signal from your service provider, the envelope icon will appear, alerting you that you
have new message(s). In addition, the blue ring around the earpiece will flash, as well as the In Use indicator on the
Base.
Once you have reviewed all new voicemail messages, the indicators will turn off.
15 Page
To locate a Handset, press Page on the Base. Each registered Handset will ‘ring’ for approximately 30 seconds. To
end the page, press Page again at the Base, or press Talk on the Handset.
16 Intercom
To talk to another registered Handset, from the idle mode, press ►.
Press ▲ or ▼ to select the destination Handset, and then press Menu/OK to confirm.
When the destination Handset rings, press any key except DEL/Mute to answer.
17 Call Transfer (requires a second Handset)
While on an active call, press ►. Your call is automatically placed on Hold.
Press ▲ or ▼ to select the destination Handset, and then press Menu/OK to confirm.
When the destination Handset presses Talk to answer, the person initiating the transfer can announce who is on the
line, and then press Talk to hang up. The destination Handset is now connected to the outside call. If the destination
Handset hangs up first, the initiating Handset will be reconnected with the outside call.
18 Conference Call (requires a second Handset)
This process is similar to a call transfer. While on an active call, press ►. Your call is automatically placed on Hold.
Press ▲ or ▼ to select the destination Handset, and then press Menu/OK to confirm. When the destination Handset
presses Talk to answer, the person initiating the transfer can announce who is on the line, and then presses Flash to
create a 3-way conference. Both Handsets are now connected to the outside call. If either Handset hangs up, the
remaining Handset can continue with the outside call.
When the second Handset enters or leaves the conference call, an alert tone is heard through the earpiece.
19 Tones
Your Handset makes various sounds for various reasons, for example:
KEY – the tone you hear when you press a key
CONFIRMATION – the tone you hear when you confirm a setting
WARNING – the tone you hear when the battery pack needs recharging
CALL WAITING – the tone you hear while on a call and Call Waiting ID is received
OUT OF RANGE – the tone you hear when the Handset is taken out of range from the Base.
You can turn each of the above tones On or Off. From the idle mode:
Press Menu/OK, and then press ▲ or ▼ until you see >Audio Settings.
Press Menu/OK again. Press ▲ or ▼ until you see >Tones.
Press Menu/OK again. Press ▲ or ▼ to choose from the list of tones above.
Press Menu/OK again. Press ▲ or ▼ to select >On or >Off. Press Menu/OK to confirm.
Press DEL/Mute 3 times to return to the idle screen.