Filter
Top Products
2. You may experience some delay in seeing the MESSAGE indicator light up even though there are messages in
your mailbox. This delay is due to regulatory matters and does not indicate a problem with the unit.
This unit may not be activated or deactivated under certain conditions. For example, when you retrieve your
message from an outside phone (not your own telephone number), the MESSAGE indicator may not be canceled
when you return home. If you experience this situation, pick up the receiver and hang up. The MESSAGE indicator
will cancel.
RECEIVING CALLS
1. When the telephone is not in use and a new call is received, the display will show the NEW symbol, the phone
number, the caller’s name, and time/date of the call for 20 seconds. The REPEAT symbol will appear if the call
has come in more than once.
2. After 20 seconds with no activity, the display will default to the Stand-by screen and remain on until another call
is received or a button is pressed. This will show you the total number of calls stored and how many new calls
have been received.
REVIEWING CALLS
1. When the NEW symbol is flashing on the Stand-by screen, you have new incoming calls. Next to the NEW
symbol is the total number of new calls. Press the Review Up or Review Down buttons to review the incoming
stored calls.
2. The NEW symbol attached to each call will be removed after you review the call.
3. If the NEW symbol is still flashing when the display goes back to the Stand-by screen, there are new calls that
you have not yet reviewed.
4. When you have reached the end of the call records, the display will indicate (-END OF LIST-), confirming there
are no more calls stored. Note: If the telephone number is more than 10 digits in length, the unit will only store
the first 10 digits into memory.
20