Filter
Top Products
FACTORY PRESETS
To ensure your telephone works properly, you must set the following options correctly before using your phone. To begin the
setting sequence, press “Mem” twice rapidly. The following table shows the factory default settings for your unit:
Display Setting
Language English
Area Code No Setting, 4 Area Codes
Setup VM No Setting
Clear VM Light No Setting
VM Access Number No Setting
#3 Sec Pauses 1
VM Password No Setting
SETUP
After the adapter is connected, the display will show as indicated below for setting.
Note: The Up Review Button or “Mem” button can be used to save the current step and move forward in setup. The Down
Review Button can be used to review entered information or alter entries.
1. LANGUAGE/IDIOMA appears on the display. “1. ENG” and “2. ESP” will flash opting for display language selection.
This will only flash for a short time before going into standby mode.
• Press 1 to select ENG (English) or press 2 to select ESP (Spanish). A check mark moves to the selection you have
made.
• Press the Up Review button to move to the next setting option.
LANGUAGE/IDIOMA 1 =ENG 2 =ESP
7