Cortelco 2194**V0E27S Telephone User Manual


 
TONE/PULSE SWITCH The TONE/PULSE switch, located on the
side of your telephone, is used to set the type of dialing for your
telephone to match the local service from your telephone company.
The ‘P’ position is for Pulse dialing service. The ‘T’ position is for
Tone dialing.
RINGER VOLUME CONTROL The 3-position switch (located on the
side of the telephone) is used to set ringer volume.
HANDSET VOLUME CONTROL The 3-position switch (located on
the side of the telephone) is used to set the handset volume.
STORE BUTTON The STORE Button is used to store numbers in
memory locations for automatic dialing. You can store a maximum of
10 one-touch numbers with 15 digits maximum. To store a number
lift the andset, press the STORE button and dial numbers (15 digits
maximum), press the STORE button again and press the desired
memory location button. Place the handset on-hook, or press the
STORE button to continue storing numbers.
REDIAL BUTTON Your Patriot II telephone stores in memory the last
nubmer dialed (31 digits maixmum). You can redial the last nubmer
dialed by lifting the handset and pressing the RD/P button. This
button must be the first button pressed after lifting the handset to
activate the redial feature. You can erase the number stored in redial
memory by lifting the handset and dialing any digit.
PAUSE BUTTON The PAUSE button can be used to program pauses
in your memory locations.
FLASH BUTTON The FLASH button sends an interrrupt signal to the
distant office. The interrupt is a 600-millisecond, timed line
disconnect which tells the distant office that you wish to use an
available feature. The results of a FLASH signal will depend on the
services you have available. DIP switch selection located on the
bottom of the phone allows for flash setting of 300 msec. or 600
msec.
HOLD BUTTON To place a call on local hold, press this button and
return the handset to tht ecreadle (the hold LED will light). To
retrieve the call lift the handset or, if the handset if off-hook, press the
hold button.
DIP SWITCH The DIP switch located on the bottom of the phone
priveds for:
a) Flash timing selection of 300 or 600 msec
b) Positive line disconnect option selection.
c) Pause time selection for 2 or 3.6 seconds.
d) A-Lead feature.
FEATURES OF YOUR TELEPHONE
7