Filter
Top Products
INSTALLING YOUR TELEPHONE
DESK INSTALLATION
To install as a desk telephone, refer to the diagram.
• Insert the baseplate mounting
posts into the mounting holes and
locking slot on the housing.
• Connect the line cord into the
jack on the back of the phone.
• Plug the line cord into the
jack and route the free end down
through the channel to the baseplate.
• Plug the unattached end of the
line cord into the modular wall jack.
WALL INSTALLATION
To install a wall telephone, refer to the diagram.
• Insert the baseplate
mounting posts and latch into the
mounting holes and locking slot.
• Plug the line cord into
the wallplate.
• Slip the eyelets of the
baseplate down onto the wallplate
posts in a downward direction.
• Adjust the wall mount
clip, located on the face of the
housing, by lifting up the clip and
rotating it 180 degrees.
Complete the Desk/Wall mounting by installing the handset
and handset cord.
CHECK FOR DIAL TONE
Lift the handset and listen for dial tone.
1) When you hear dial tone, your telephone is ready to use.
2) If you do not hear dial tone, refer to the Telephone Service
Problems part of your manual.
10