Filter
Top Products
BEFORE USING YOUR TELEPHONE
1. Set the ringer volume control. If the control is set
to OFF, you will not hear the ringer when someone
calls you.
2. Your telephone has a TONE-PULSE switch. Set
the switch to match the dialing service from the tele
phone company.
• If you have pulse service, set the Tone-Pulse
switch to PULSE.
• If you set the switch for TONE service, you must
have TONE service or you cannot dial.
• If you set the switch for PULSE service and you
haveTONE service, you can dial numbers, but you
cannot use distant services, such as bank-by-
phone, unless you press the TONE button.
USING YOUR TELEPHONE
TO PUT A CALL ON LOCAL HOLD
While on a call, press the HOLD button, the LED lights and the call
is on local hold. Place the handset on hook, the HOLD indicator
remains on while the call is on local hold.
To return to the call on hold:
Lift the handset or if the handset is off-hook, press the HOLD
button, the LED will go off and the call is no longer on hold.
TO STORE NUMBERS:
Lift the handset, you will receive dial tone. Press the STORE button
and dial the number (15 digits maximum). If desired press the
PAUSE button to insert a two-second pause in the number sequence.
Then press the STORE button again and press desired memory
location button and place the handset on-hook, or press the STORE
button to continue storing numbers. Use the shift button to store in
two-touch memory locations.
TO DIAL STORED NUMBER:
To dial the stored numbers in the 10 one-touch memory locations:
1. Lift the handset.
2. Press memory location button
MAINTENANCE INFORMATION
Treat your telephone with care for trouble-free
performance. Avoid dropping the handset. Carefully place
the handset on-hook after use.
Clean your telephone with a damp cloth. Stains
may be removed with a mild soap. Do not use liquid or
aerosol detergents or cleaning agents.
5