Filter
Top Products
Industry Standard Telephone User’s Guide
September, 02 Comdial 15
8. USING THE MESSAGING FEATURE
• Using Message Waiting Control
)
Only the person who sent the message and the person receiv-
ing the message can turn off the message-waiting light.
• To turn on the message-waiting light and broken dial tone at
a telephone
)Message Wait Stutter Dial Tone must be enabled in Class of
Service programming for the target station.
1. Dial * 3.
2. Dial station number of the telephone you want to alert. The
message-waiting light of that station will flash.
• To turn off the message-waiting light and broken dial tone at
a busy or idle station
1. Dial # 3.
2. Dial station number of the telephone you alerted. The message-
waiting light of that station will turn off.
• To retrieve a message at an alerted station
1. Observe flashing message waiting light or hear broken dial
tone.
2. Lift handset.
3. Dial # 00.
)
Due to differences in system programming, you may have to
retrieve messages by obtaining intercom dial tone and dialing
the operator’s station number.