Making Calls
8 Comdial September, 02
• To dial system speed dial numbers (if all lines in the line
group used for the preselect are busy)
1. Lift the handset and listen for intercom dial tone.
2. Dial a different line group access code than the one used for the
preselect and listen for outside dial tone.
3. FLASH the hookswitch -and- dial *01*
4. Dial the desired speed dial bin. Depending on how your system
is configured, the speed dial bin code can have the following
range: Contact your system administrator to determine which
range is active.
d) For systems setup with 500 storage locations, the range is
100-599
e) For systems setup with 1000 storage locations, the range is
000-999.
f) For systems setup with 2000 storage locations, the range is
0000-1999.
• To store an intercom number as a speed dial number
1. Lift handset and listen for intercom dial tone.
2. Dial * * 1.
3. Press the button you want to program (1–0).
4. Press 8 to preselect intercom.
5. Dial the intercom number or feature code you want to store (up
to 16 digits that can include # and *).
6. Hang up handset.
7. Repeat procedure for each speed dial number.
)You cannot program pauses or hookflashes with intercom
speed dial numbers, and the system will not accept *#0* or
*#746* as programming entries.