Filter
Top Products
Industry Standard Telephone User’s Guide
September, 02 Comdial 7
• To dial personal speed dial numbers
1. Lift handset and listen for intercom dial tone.
2. FLASH the hookswitch -or- dial * 01,
3. Press desired speed dial location (dial pad buttons 1–0).
Call will dial automatically.
• To dial personal speed dial numbers (if all lines in the line
group used for the preselect are busy):
1. Lift the handset and listen for dial tone.
2. Dial a different line group access code than the one used for
the preselect and listen for outside dial tone.
3. Flash the hookswitch -and- dial *01
4. Press the desired speed dial location (dial pad buttons 1-0).
The call will dial automatically over alternate line group.
• To dial system speed dial numbers
1. Lift handset and listen for intercom dial tone.
2. FLASH the hookswitch -or- dial * 01*.
3. Dial the desired system speed dial bin code. Depending on
how your system is configured, the speed dial bin code can
have the following range: Contact your system administrator to
determine which range is active.
a) For systems setup with 500 storage locations, the range is
100-599
b) For systems setup with 1000 storage locations, the range is
000-999.
c) For systems setup with 2000 storage locations, the range is
0000-1999.