Filter
Top Products
DSUII Attendant User’s Guide
August, 03 Comdial 105
8.10 System Alarm Reporting
Occasionally, the DSU II Digital Expandable Systems system will fail
to communicate with a particular station; it could be that the station
has been disconnected from its station port or that the system printer
is off line. When the system experiences these disruptions, an alarm
signal will display at your station or any LCD speakerphone when
designated by the installer. In order to review the system alarms, the
attendant can command the system to present alarm codes on the
station display. When this feature is provided, a flashing * appears
on the first line of your telephone’s LCD to indicate that new alarms
are present.
• To display alarm codes,
1. DIAL AND HOLD * for five sec-
onds. The following status reports
will be displayed:
• Station disconnected from
station port for more than five
minutes. Month, day, station port number, and station
extension number are shown.
Display shows: “Mo/Da Pxx
xxxx A”
• Communications difficulty
between a station and the
common equipment. The
number of parity errors, up to
256, and the affected station
port are shown.
Display shows: “xxx PARITY Pxx”