Vertical Communications SCS 8212N Telephone User Manual


 
9.2 Storing Speed Dial Numbers
To store an outside number as a speed dial number,
NOTE: Programming overwrites existing speed dial numbers at button
locations.
1. Press INTERCOM.
2. Dial ✳✳ 1.
3. Press programmable button or dial pad button to choose storage
location (remember, to access second level storage at a
programmable button, press SHIFT first.)
4. Make your speed dial route selection choice from the following list:
press line button to select outside line,
dial 00 to select prime line or last line used,
dial 01–16 to select line group,
press INTERCOM button or dial 8 to select intercom.
5. Dial number (up to 16 digits long—include and # if needed).
NOTE: You may need a pause between numbers to compensate for
differences in response time between your system and the host
system (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host
system that needs a hookflash to access a feature, press TAP to
store a hookflash, then continue dialing.
6. Press TRANSFER/CONFERENCE to store number.
7. Press next location button and store next number, repeat previous
steps until all numbers are stored,
—OR—
press SPEAKER to end.
Programming Your Telephone GCA70–313
9 – 2 Station User's Guide