Vertical Communications SCS 8212N Telephone User Manual


 
To interrupt the redialing procedure so that you can use your
telephone to make a call,
NOTE: You can only do this if the suspend automatic redial feature is
enabled.
1. While your telephone is in the process of dialing a number, press
the AUTOMATIC REDIAL button twice. This treats the number
as answered, and then puts the number back in the automatic redial
queue.
To cancel the automatic redial feature,
NOTE: You can only do this if the suspend automatic redial feature is
disabled or while the telephone is in the process of autodialing.
1. Perform any user activity at the station (go on-hook, press the
speaker button, etc.),
—OR—
press # 72 to delete all numbers from the redial queue,
—OR—
press the AUTOMATIC REDIAL button while the number you
wish to remove from the redial queue is ringing.
NOTE: The system allows only ten numbers in the redial queue. In
order to add a number to a full redial queue, you must remove
one of the numbers from the queue before dialing the new
number.
3.5 Using Line Groups
Some systems have telephone lines arranged into line groups. These line
groups are available at each telephone. When line groups are available
for your use, you may access them for outside calling instead of pressing
a line button to select an individual line for use.
To access line groups,
1. Lift handset or press INTERCOM.
2. Dial desired line group access code:
9 = line group 1
80 through 89= line groups 2 through 11
60 through 64 = line groups 12 through 16
3. Dial desired number.
GCA70–313 Making Calls
Station User's Guide 3 – 5