Filter
Top Products
MODE FUNCTIONS
OPERATION
To Set the VOX Sensitivity Level:
1. Press the MODE button until
the VOX icon flashes and
the current sensitivity level
is displayed.
The current sensitivity level is
displayed with the letter “L”
a
nd a number 1 to 5, 5 being
the most sensitive level and 1
being the least sensitive level.
2. Press the CHANNEL UP or
CHANNEL DOWN button to
change the setting.
3. When your desired VOX
sensitivity level is displayed,
choose one of the
following:
a. Press the MODE button to enter the new
setting and proceed to other functions.
b. Press the LOCK button to enter the new
setting and return to LISTENING MODE.
c. Do not press any buttons for fifteen (15)
seconds to enter the new setting and return
to LISTENING MODE.
English
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the TALK button to
communicate on that channel. Your radio will
remain on that channel and return to
L
ISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN
b
utton to resume scanning channels.
If you press the TALK button while scanning and
not within ten (10) seconds of receiving a
transmission, you will transmit on the channel on
which you last received a transmission. This will
return the radio to LISTENING MODE.
If you do not press any button within ten (10)
seconds, your radio will automatically resume
scanning channels.
During Scanning (while not receiving
a transmission), You Can Choose From
The Following:
a. Press and hold the TALK button to
communicate on either the channel or
channel/privacy code that was displayed
before you entered Mode Functions or the
channel on which, during scanning, you last
received a transmission. This will return the
radio to LISTENING MODE.
b. Press the MODE button to proceed to set
CTCSS privacy code on the channel that was
either displayed before you entered Mode
Channel Scan
Your microTALK
®
radio can automatically scan
channels (1 to 8).
NOTE: The radio ignores specific CTCSS privacy
codes while scanning channels.
To Scan Channels:
1. Press the MODE button until
the Scan icon and the
channel number flash on
the display.
2. Press the CHANNEL UP or
CHANNEL DOWN button to
begin scanning channels.
The Scan icon will continue to
be displayed when channel
scan is On. Your radio will
continue to scan all channels
and stop if an incoming
transmission is detected. Your
radio will remain on that
channel for ten (10) seconds.
While setting channel scan, if you do not press
any buttons for fifteen (15) seconds your radio
will automatically return to LISTENING MODE on
the channel or channel/privacy code displayed
before you entered Mode Functions.
Functions or on which, during scanning, you last
received a transmission (see “CTCSS Privacy Code
Scan” for fur
ther details).
c. Press the LOCK button to return to
LISTENING MODE on either the channel or
channel/privacy code that was displayed
before you entered Mode Functions or the
channel on which, during scanning, you last
transmitted or received.
CTCSS Privacy Code Scan
Your microTALK
®
radio can automatically scan
the CTCSS privacy codes (01 to 38) within
one (1) channel.
To Scan Privacy Codes:
1. While in LISTENING MODE,
press the CHANNEL UP or
CHANNEL DOWN button to
choose the channel on
which you wish to scan the
CTCSS privacy codes.
2. Press the MODE button
until the Scan icon and the
small numbers next to the
channel number flash on
the display.
3. Press the CHANNEL UP or
CHANNEL DOWN button to
begin scanning CTCSS
privacy codes within the
channel you selected.
Mode Button
Channel Buttons
Select Scan Channels
Select Scan Privacy
Codes
Mode Button
Select Channel
C
hannel Buttons
Select VOX
Sensitivity Level
M
ode Button
Channel Buttons