Filter
Top Products
Voice Activated Transmit (VOX)
•
In VOX mode, your microTALK
®
radio can be used “hands-free,”
automatically transmitting when you speak. You can set the
VOX sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
To turn VOX mode on or off:
1. Press the Mode/Power button until the VOX
icon flashes on the display. The current On or
Off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn VOX On or Off.
3.Choose one of the following:
a. Press the Mode/Power button to enter the
selected On or Off setting and proceed
to other functions.
b. Press the Lock button to enter the
selected On or Off setting and return
to Standby mode.
To set VOX sensitivity:
1. Press the Mode/Power button until the VOX
icon flashes and the current sensitivity level
is displayed.
The currentVOX sensitivitylevel is
displayed with letters “LE” and a Number
1 through 5, with Number 5 being the
most sensitive level and Number 1
being the least sensitive level.
2. Press the Channel Up or Channel Down
button to change the setting.
3. Choose one of the following:
a. Pressthe Mode/Power button to enter
the selected setting and proceed to other
functions.
b. Press the Lock button to enter the selected
setting and return to Standby mode.
CustomerAssistance WarrantyIntroduction OperationOperation
Mode Functions
8
9
Set DCS Privacy Codes
•
To select a DCS privacy code:
1. After selectinga channel,presstheMode/Power
button until the DCS icon appears and the
small numbers flash on the display
(01 through 83).
2.PressusingtheChannelUporChannelDownbuttontoselecta DCS
privacy code.Youcan hold theUp or Down button forfast advance.
3. When your desired DCS privacy code is displayed, choose one of
the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press the Lock button to enter the new setting and return to
Standby mode.
c. Do not press any buttons for 15 seconds to enter the new
setting and return to Standby mode.
ChannelButtons
M
ode/LockButton
DCSPrivacyCode
If CTCSS is turned on at the channel
selected, the display will flash the DCS
iconand “OFF.” To switch from CTCSS to
DCS, press the Channel Up or Channel
Downbutton while the display is flashing
“OFF.” The display will then show the
small numbers flashing andyou will then
be able to proceed to step 2.
VOX Icon
ChannelButton
Mode/Power
ChannelButton
Mode/Power
VOXSensitivityLevel
Nothing Comes Close to a Cobra
®