Filter
Top Products
Customer Assistance WarrantyIntroduction
17
Operation
16
Mode Functions
Operation
Channel Scan
•
Your microTALK radio can automatically scan channels.
To scan channels:
1. Press the Mode button until the
Scan icon and the channel numbers
flash on the display.
2. Press the Channel Up or Channel Down button
to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
The Scan icon will continue to be displayed
when scan is on. Your radio will continue to
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for 10 seconds.
While setting channel scan, if you do not press any buttons for 15
seconds, your radio will automatically return to Standby mode on
the channel or channel/privacy code displayed before you entered
mode functions.
To de-program a memory location:
1. Press the Mode button until the Memory icon
and the memory location
flash on the display.
2. Press the Channel Up or Channel Down button
to select the memory location (0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3. Press the Lock/Enter button. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down button
to select Channel 0.
5. Choose one of the following:
a. Press the Lock/Enter button to enter the
channel/privacy code in the selected memory
location and return to the beginning of memory
location options.
b. Press the Mode button to enter the
channel/privacy code in the selected memory
location and proceed to other functions on the
channel/privacy code displayed before you
entered mode functions.
While de-programming a memory location, if you do not press any
buttons for 15 seconds, your radio will automatically return to
Standby mode on the channel/privacy code displayed before you
entered mode functions.
Mode Button
Channel Buttons
Scanning Channels
Mode Button
Channel Buttons
Memory Icon
Lock/Enter Button
Channel 0
Nothing Comes Close to a Cobra
®