Filter
Top Products
Customer Assistance WarrantyIntroduction
15
Operation
14
Mode Functions
Operation
To recall a stored memory channel location:
1. Press the Mode button until the Memory icon
and the memory location number flash on
the display.
2. Press the Channel Up or Channel Down button
to select a memory location (0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3. Press the Talk button to return to Standby mode
on the selected memory location.
A memory location can be reprogrammed at
any time it is displayed and flashing. Press
the Lock/Enter button to begin.
While recalling a stored memory location, if you do not press any
buttons for 15 seconds, your radio will automatically return to
Standby mode on the channel/privacy code displayed before you
entered mode functions.
6. Choose one of the following:
a. Press the Channel Up or Channel Down button to select a
CTCSS privacy code (01 through 38) for the channel.
b. Press the Lock/Enter button to switch from CTCSS to DCS.
The DCS icon and privacy code numbers will flash on
the display. The Channel Up or Channel Down button can
then be used to select a DCS privacy code (01 through 104)
for the channel.
If “OFF” flashes in place of the privacy code numbers,
a privacy code is already set in the opposite (CTCSS or DCS)
system. Press the Channel Up or Channel Down button to
cancel the opposite code and select a privacy code from the
active system for the selected channel.
7. Choose one of the following:
a. Press the Lock/Enter button to enter the channel/privacy
code in the selected memory location. Radio then proceeds
to next Memory location, which will blink.
b. Press the Mode button to enter the channel/privacy
code in the selected memory location and proceed to other
functions on the channel/privacy code displayed before you
entered mode functions.
c. Press the Talk button to enter the channel/privacy code in the
selected memory location and exit mode functions. Upon release
of the Talk button, the radio will enter Standby mode on the
channel/privacy code just entered.
Mode Button
Channel Buttons
Memory Icon
Nothing Comes Close to a Cobra
®