Cobra Electronics C P - 7 2 0 Cordless Telephone User Manual


 
DIGITAL SECURITY
Your Cobra Intenna is manufactured with
65,000 randomly generated security codes
to guard against accidental or intentional
eavesdropping on your private
conversations.
ILLUMINATED KEYPAD
When the phone rings or you touch any
button, the keypad automatically lights up,
making it easy to read and use, even in the
darkest room or late at night.
ELECTRONIC HOLD
Save time and steps in houses with more
than one telephone. After you put a call on
hold, your Intenna automatically releases
when you, or someone else, picks up
another handset on the same line. No need
to come back and turn it off, because it
turns itself off automatically.
LAST NUMBER REDIAL
(from handset only)
Reached a busy number? Press FLASH to
get a new dial tone, then press REDIAL
button and the last number called will be
redialed for you.
AUTOMATIC LAST
NUMBER REDIAL
(from speakerphone
on base only)
You’re getting a busy signal but need to get
through as soon as possible. No problem.
When the number you’ve dialed is busy,
disconnect from the speakerphone by
pressing SPEAKERPHONE button, the
press AUTO REDIAL button. The number
will redial and the Speakerphone LED will
flash. If the number is still busy, the Auto
Aside from the features that have already
been outlined, your Cobra Intenna is easier
to program and use than ever before
because many of the features you want
most are built right in—You don’t have to do
a thing!
BUILT-IN ANTENNA
There’s no unsightly antenna to extend,
nothing to get bent or broken or possibly
even cause physical harm, because
antennas are built into the handset and
base. That, along with our Clear Call
®
PLUS
Compander Noise Reduction system which
minimizes background noise and
interference for optimum audio
performance, makes the Intenna quality
comparable to a standard corded phone.
SCRAMBLED SIGNALS
Although you may not realize it, other
people with cordless phones, scanners or
even baby monitors may be listening in on
your conversations. This is especially
disturbing when discussing personal
information such as credit card numbers,
vacation plans, etc. over the phone. Cobra’s
PRIVATE CALL
voice scrambler eliminates
that worry forever!
10-CHANNEL
RECEPTION
Your Cobra Intenna automatically scans
through 10 channels every time you pick up
the handset, to offer you the clearest, noise-
free connection available. Should
interference occur during a conversation,
simply press and release the CHANNEL
button until you reach a clear channel.
Redial feature will try the call again in 60
seconds, up to 10 times. When the call is
answered, press SPEAKERPHONE to be
connected. If you decide to call another
number, the Auto Redial for the previous
number will be cancelled. To disconnect the
Auto Redial feature, press the AUTO
REDIAL button again (Speakerphone LED
will go out).
HEARING AID
COMPATIBLE (HAC)
Your Cobra Intenna handset is specially
designed to be compatible with standard
hearing aid systems.
FLASH BUTTON
Press and release the FLASH button to
briefly interrupt the phone line and, if you
subscribe, access some of the advanced
options like “Call Waiting” or “Three Way
Calling” that may be offered by your
telephone company.
HANDSET AND BASE
VOLUME CONTROLS
Gradually change the volume of your caller’s
voice from low to high or high to low by
pressing the volume control up/down
button located on the side of your handset.
You may do the same for the speakerphone
by using the up/down button located on the
base. Adjust to 3 levels from the handset
and 16 levels from the base.
OUT-OF-RANGE SIGNAL
When you press the TALK button and
immediately hear three beeps, you know
your handset is too far away from the base
to work properly. Move closer to the base
and try your call again.
BATTERY SAVER
The handset may be positioned away from
the base without losing power for up to 7
days, depending upon how often you use it.
Cobra suggests that you regularly leave the
handset in the base (for example, overnight)
when not in use to keep your handset
battery from losing its charge. The battery
will not overcharge, even though the
CHARGE indicator light remains on.
PULSE/TONE SWITCH
Your Cobra Intenna may be set to either
PULSE or TONE, (depending upon your
phone system) by moving the switch
located on the back of the base. Mixed
PULSE and TONE dialing may be used
(when you have a PULSE system and need
to access certain long-distance or
computerized banking services) by keeping
the base switch to PULSE and pressing the
TONE button on the handset to temporarily
switch to TONE. Hanging up resets to
PULSE.
RINGER SWITCH FOR
HANDSET OR BASE
You’re taking a nap, watching your favorite
TV show or just got the baby to sleep and
don’t want to be disturbed. Temporarily turn
off the ringer on the handset, the base or
both by moving the switch on the side of
the base into the off position.
2-POSITION HANDSET
Handset may be positioned lying down or
upright. However,it will not charge in the
base when standing upright.
15
1-773-889-3087
NEED HELP?
CP-720
Cobra
®
ADDITIONAL FEATURES OF YOUR NEW COBRA INTENNA CORDLESS TELEPHONE WITH 32 NUMBER MEMORY