Filter
Top Products
Operation
13
Operation
12
Note
The reading will beslightly
higher on Channels 1 and40
compared to Channel 20.
Note
When switched to SWRposition
the meter needle shouldideally
be as farto the leftas possible.
Anythingover3 isnotacceptable.
The antenna indicator will light.
A slight antenna height
adjustment (higher orlower)
may be required. Repeat
calibration steps.
Repeat the same steps two through five
on Channel 1 and 40.This will check SWR
for all channels.
6
While still holding down the mic button,set
the S/RF SWR CAL switch to the SWR position,
to read the SWR reading.
5
Rotate the On/Off Volume knob clockwise
the green RX/TX LED will be illuminated.
To Receive
1
To Receive