Filter
Top Products
Setting Dynamike®
This controls the microphone sensitivity
(outgoing audio level).
To Transmit
23
To Transmit Transmit
TalkBack
22
Setting
Dynamike
®
Caution!
Be sure theantenna is properly
connected to the radio before
transmitting.Prolonged
transmitting without an
antenna,or a poorly matched
antenna,couldcause damage
to the transmitter.
Be sure to read the F.C.C.Rules
and Regulations included with
this unit before transmitting.
Operation
Operation
1
Select desired channel.
1
ANT/
Initially,set fully clockwise so that maximum
voice volume is available.Dynamike® may have
to be reduced in some conditions.
Transmit
Pushandhold mic button to transmit.Transmitter
is now activated.When transmitting,hold the
microphone two inches from your mouth and
speak in a clear,normal voice.Releaseto receive.
1
Setting TalkBack
This control is used to adjust the desired amount
of modulation talk back that is present at the
speaker during transmit. At fully counter-clockwise
position the talk back is off.
ANT/