Filter
Top Products
Operation
Operation
Bluetooth
®
15
14
Bluetooth
Calls on a Bluetooth enabled cell phone can be
routed through the 29 LTD BT speaker or external
speaker accessory.
ToPairwith a Cell Phone
With 29 LTD BT power On,press and hold the BT Button
for six seconds to enter Standby mode. Atone will sound
andthe BT LEDwill flash forone minuteto confirmentry
toStandby.
FromStandby,press and hold the BT Button for four
seconds to enter Pairing mode.
A. Firsttime pairing with acell phone:
I.A tone will sound and the BT LED will flash rapidly
to confirm Pairing mode.
II.Follow the cell phone manufacturer'sinstruction
to enable its Bluetooth function and enter the PIN
(PersonalIdentificationNumber)0000.
III.Successful pairing will be indicated by a tone and
brief flashing of the BT LED to confirm entry to
Connectedmode.A pairrecordwillalsobeestablished
for subsequent connections.
B.Subsequent pairingswith a cell phone:
I.Follow any cell phone manufacturer instructions,
if needed,to enable the Bluetooth function.
II.Successful pairing will be indicated by a tone
and brief flashing ofthe BT LED to confirm entry
to Connected mode.
1
2
ToAnswerCalls
Press and release the BT Button when the cell phone ring
is heard through the 29 LTD BT speaker.The BT LED will
light steadily to indicate acall is in progress.
Speakintothe29 LTDBTmicrophone.TheCB functionof the
unitandPTT Buttonwillbe disabledwhile acallis inprogress.
End the call by press and release of the BT Button.
AtonewillsoundandtheBTLEDwillflashbriefly.
ToInitiateCalls
Dialanumberaccordingto thecellphonemanufacturer’s
instructions.The keypress and other tones will be heard
through the 29 LTDBT speaker.
PressSend onthe cell phone.The BT LED will light steadily
to indicate a call isin progress;and after a few seconds,
you will hear the ring tone for the number you dialed.
Once connected,speak into the 29 LTD BT microphone.
End the call by press and release of the BT Button.
The BT LED will flash briefly.
Redial a number by press and hold of the BT Button for
two seconds.Atone will sound;and aftera few seconds,
you will hear the ring tone for the number you dialed.
Note
If no further pairingstepsare
taken,theunit will time-out
and return to Standby after
five minutes.During the
pairing process,press and
release the BT Button to
cancelthe pairing process.
1
2
3
1
2
3
4
5
ToEnable or DisableVoiceDialing
If the paired cell phone supportsvoice dialing,pressand
release the BT Button twice to toggle between enabling
and disabling this feature.
ToTurn OffThe BluetoothFunction
Pressand hold the BT Button for six seconds to turn off
the Bluetooth function.Two short tones will sound and
the BT LED will turn Off and remain Off.
ToRe-pairThe29 LTDBTToTheCell Phone
Ifpairingislostwhilethe29LTDBTpowerisOn,pressandhold
the BT Button for four seconds to re-pair withthe cell phone.
Ifthe29 LTDBTis turnedOff,itwillretain theBluetooth address
and automatically re-pair with the last cell phone usedwhen
it is turned back On.
BT LED
Indicator
BT Button
Note
For best audio quality while
using the Bluetooth feature,
place your cell phone at least
12 inches away from the
29 LTD BT.
Note
When cell phone calls are in
progress using the Bluetooth
feature,the CB functions of
the unit are disabled.
Note
The optional external
microphone (see accessories
on page 35) can be plugged
into the rear of the unit and
clipped to apocket or lapel for
hands-freespeechduringcalls.
When the optional
microphone is plugged in,
themainmicrophonewillnot
pick up speech during calls
but will be fully functional
for CB operation.