Filter
Top Products
6 – ENGLISH
7 – ENGLISH
Setting The Voice Prompt YES/NO
The telephone is factory preset with all voice features ON. The volume of the
voice features is regulated through the VOLUME HI/LO slide switch.
If the user does not wish to hear the voice prompts, they can turn off the voice
feature.
1. Press and release the MENU button until VOICE is shown.
2. Press the DIAL button.
3. Using the or to select between VOICE ON or OFF and confirm with
DIAL button.
4. Press button to exit the set-up mode.
Setting Tone /Pulse Dialing Mode
You can select the required dialing type TONE/PULSE.
1. Press and release the MENU button until TONE/PULSE is shown.
2. Press the DIAL button.
Select the required dialing type using the 3. or and confirm with DIAL
button.
4. Press button to exit the set-up mode.
Setting Ringer Volume Control
The ringer sound level can be adjusted by sliding the RINGER switch to select
HI, MID and LO level.
The red bright LED will flash with all incoming calls.
Setting The Handset Volume Control
The Boost LED is used to reflect the handset extra volume setting.
Press the1. button, the Boost LED will turn ON.
Increase the handset volume by rotating the2.
knob to select the listening
level (level 1 to level 9).
During the conversation, you may turn OFF the Boost by pressing the 3.
button, the Boost LED will turn OFF and the sound level will return to
normal.
When you hang up4. , the phone will reset to normal sound level.
Note: Choose not to press the button and the Boost LED will remain OFF. This
is the setting to use for people who do not require the level of amplication and tone
control offered on the phone.
Setting Tone Control (TONE HI/LO)
The Tone control allows you to t your specic hearing needs, so words are
clearer and easier to understand. Slide the Tone control DOWN to boost
the lower frequency range. Slide the Tone control UP to boost the high
frequency range. Note: The tone control function will not be effective when
the Boost LED is OFF.
Talk500UserGuide.indd 7 2/4/08 5:10:22 PM