ClearSounds TALK500 Telephone User Manual


 
12 – ENGLISH
13 – ENGLISH
1. Press and release button, icon is shown.
2. Select the required location from the phone book by pressing or .
3. To delete single memory, press DELETE button once. The display will show
the DELETE?. Press DELETE button for 2 seconds. The telephone number
and name will be deleted and the display will now show another number
from the phone book.
To delete all entire memory, press and hold DELETE button until the display
shows DELETE ALL?. Press DELETE button for 2 seconds until EMPTY
appears on the display.
Storing Numbers In The MEMORY Button
This telephone has 3 One-Touch memories numbered M1, M2 and M3.
Once a number has been stored in a memory location, you only need to
press one button to make the call.
1. Press and release the MENU button until the STORE NUMBER is shown.
2. Press the DIAL button. The cursor will flash in the first position.
3. Enter the required telephone number with a maximum of 22 digits using the
number pad and confirm with DIAL button.
4. Press the memory button (M1, M2 and M3). The number has now been
saved and display shows SAVED!.
Dialing Using The Memory Buttons
1. Lift the handset or press
button and wait for a dial tone.
2. Select the required memory location (M1- M3) by pressing the corresponding
button.
-OR-
1. Pressing the corresponding button.
2. Lift the handset, press the DIAL button or press
button, the number will
dial out automatically.
Voice Mail
You can store your VOICE MAIL box telephone number for easy dailing
1. Press and release the MENU button until the STORE NUMBER is shown.
2. Press the DIAL button. The cursor will flash in the first position.
3. Enter the required telephone number with a maximum of 22 digits using the
number pad and confirm with DIAL button.
4. Press the memory button VOICE MAIL. The number has now been saved
and display show SAVED!.
To access your message(s):
1. Press the VOICE MAIL button. Your call will be put through to the mailbox
and your message(s) played back to you.
2. Replace the handset to end the call.
Note: Subscription is required to use the Voice Mail service.
Talk500UserGuide.indd 12 2/4/08 5:10:24 PM