Filter
Top Products
5 – ENGLISH
5 Handset tone control: Adjust
the incoming voice tone level
on your handset so you can
clearly understand every
word.
6 2.5mm headset jack: To
connect your hands-free
headset.
7 F button (FLASH/DELETE):
Press to answer an incoming
call if you have Call Waiting
or “F” button to be used to
cancel an action/entry or clear
a stored Caller ID call
8 MEMO button (PROGRAM):
Press to store numbers in
memory or to call a number
you’ve previously stored.
9 LCD display: The screen shows
the activity and programming
of your handset. The Caller ID
feature is optional
10 Arrow UP/DOWN button: Use
to highlight or scroll through
the menu
11 R/P button (REDIAL/PAUSE):
Both the last number redial
and the pause feature. Press
to redial the last number
you’ve dialed. To insert a
pause while dialing
12 Lighted keypad: The keypad
stays lit up for 15 seconds
after removing the handset
from the base. To reactivate
the feature while in standby,
press the
or the “MEMO”
button. To activate while the
phone is in use, press any
key.
13 Amplify button: Use to
turn ON/OFF the additional
handset amplification.
14 Shake mode switch: Turns the
handset shaker ON/OFF when
the telephone rings
15 Belt clip: Use to attach
handset to the waist
16 Page icon button (PAGE):
Press to page the handset.
The handset will ring for
about 25 seconds then end
the paging automatically.
17 Charger indicator LED: Lights
up when handset is placed on
the base for charging. (RED)
18 Charging terminals / contacts:
To charge the batteries
inside the handset. For
best performance, clean
periodically with a damp cloth
only.
19 Telephone line connection
jack: To connect to the
telephone line jack.
20 Ringer volume switch: Set the
base ringer HI/MED/LO/OFF.
21 Shaker plug: To connect to an
optional vibrating shaker.
22 Adapter plug-in connection:
To connect the AC Adapter to
the base.
Auto Amplified Switch (inside
the battery compartment
on the lower right side, not
shown)