Filter
Top Products
11 – ENGLISH
NOTE: Only one handset can be in use at a time.
Paging
Press the PAGE button to page the handset
Press the PAGE button once more to cancel the paging operation.
If you do not press PAGE button again, the handset will ring for
about 25 seconds then end the paging automatically.
PHONE BOOK
Storing names and numbers in the phone book
You can store up to 60 names and numbers in the memory.
Adding Names and Numbers to the Phone
1 In standby mode, input the number you want to store by using the
keypad
2 Press the MEMO button and then the LCD will show NAME
3 Enter the name using the keypad. If the next character is on the
same button as previous one, ie. K,L, you will need to wait for
about 2 seconds before entering the next character. You can press
the F button to delete any letters entered in error. Press “1” to
enter a space.
4 Press the MEMO button to confirm; you should hear a confirmation
beep
Copying Caller ID numbers to phone book:
1 In standby mode press the
or button repeatedly to find out the
Caller ID number you want to add.
2 If the number has the caller’s name, press MEMO button to store. If
the number does not have the caller’s name, press MEMO button,
then enter the name. After that, press the MEMO button again to
store.
Reviewing names and numbers in the phone book.
In standby mode, press the MEMO button, the LCD shows the total
number of records.
There are 3 ways to review the records.
1 Press the
or button to review the records
2 Enter the caller’s name, then press the MEMO button to review the
matching record
3 Enter the first character of the caller’s name, then press the MEMO
button. The LCD shows the matching records, press the or
button to get your desired record.