Filter
Top Products
31
To Dial A Number From The Phone Book:
In the hook position,
1. Press the MUTE button to access the Special Feature Menu.
2. Using the or arrow buttons, highlight <<PHONE BOOK>>.
3. Press the OK button to confirm.
4. Using the or arrow buttons, scroll to select <<REVIEW>>.
5. Press the OK button.
6. Use the arrow buttons to locate the number you wish to dial.
7. Either pick-up the handset, press the SPKR (speakerphone) button or, if you are
using either of the hands-free jacks, press the
(headset) button. Your 40XLC
Phone will automatically dial the number.
Recall / Delete One Of the Last 30 Numbers Dialed
You can call back the last 30 numbers dialed. To call back one of them, follow instructions
below:
In the hook position,
1. Press the OK button.
2. The screen will display “DIALED”, the last number dialed, the total of numbers, the
date and the hour of record.
3. Using the or arrow buttons, scroll through the numbers and select the
number you wish to dial.
4. Lift the handset or press the SPKR button, the number will be automatically dialed.
To delete one of telephone numbers, follow instructions below:
In the hook position,
1. Press the OK button.
2. The screen will display “DIALED”, the last number dialed, the total of numbers, the
date and the hour of record.
3. Using the or arrow buttons, scroll through the numbers and select the
number you wish to delete.
4. Press the C button.
5. The Screen will display “DEL?”
6. Press again the C button to confirm.
7. Press the OK button to exit.
AUTO ON HOOK
When the Auto On Hook feature is ON, Your ClearSounds 40XLC will automatically dis-
connect the line after 5 - 8 minutes if the phone is left off the hook. This will restore your
line to be able to receive another call even if you leave the handset off the base.
In the hook position,
1. Press the MUTE button to access the Programming Menu.
2. Using the or arrow buttons, highlight <<SET PHONE>> then press the
OK button to confirm.
3. Using the or arrow buttons, scroll to select <<AUTO ON HOOK>> and
press the OK button.