Filter
Top Products
W-1000Page 12
Note for Users with Pulse/Rotary
service only: Many automated answering
systems used by banks, stores and
government agencies ask you to “Push 1 for
service”, “Push 2 for the operator”, etc. You
must switch the tone/pulse switch on the
top edge of the phone to tone before
responding to these prompts. In summary,
dial the phone number you want to call in
pulse mode, switch to tone mode to interact
with the automated answering system,
switch back to pulse mode when your call is
done. When switching from Pulse to Tone
during a call, there will be a 3 second delay
from the time you first push a key in tone
mode until the key press is transmitted. You
cannot switch from tone to pulse during a
call.
1. Depress the hookswitch to get a new
dial tone.
2. Press the “Redial” Button once.
3. Stay on the line, and your call will be
dialed.
Important: You must have tone signaling
service to use the TONE feature on the
Walker Clarity. If in doubt, contact your local
telephone company.
To Set the TONE/PULSE
Switch:
1. Move the switch towards the correct
setting.
2. Depress the hookswitch once.
Last Number Redial
Last Number Redial allows you to
automatically redial the last telephone
number you called. This feature is
convenient for redialing numbers which
are busy. The phone number stored for
redial will be reset with every new call
you make.
To Operate Last Number
Redial:
Features
Continued
The last number dialed will be stored in
the Walker Clarity for you until you dial
another number or disconnect the
telephone from the wall jack.
3. The phone will now dial in the mode
you selected.
* * * * * *
E
N
G
L
I
S
H
W1000_User_Guide 11/15/99, 9:38 PM12