Clarity RC200 Conference Phone User Manual


 
CHAPTER 9
REGULATORY INFORMATION
14
CHAPTER 8
MAINTENANCE
To ensure trouble–free service, your
RC should always be treated with care. Do
not drop or subject the phone to high impact.
The unit can be cleaned with a damp cloth
and a mild detergent. Never use abrasives or
solvents.
Keep the unit plugged into the electrical outlet
at all times, except when cleaning.This will
automatically recharge the optional back–up
batteries, and keep the phone operational for
incoming calls.We recommend using a surge
protector to prevent damage to the
RC in
case of power surges or electrical storms.
Part 68 of FCC Rules Information
This RC100 or RC200 Remote Controlled
Speakerphone complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA.
On the bottom of this equipment is a label
that contains, among other information, a
product identifier in the format
US:AAAEQ##TXXXX. If requested, this num-
ber must be provided to the telephone com-
pany.
A plug and jack used to connect this equip-
ment to the premises wiring and telephone
network must comply with the applicable FCC
Part 68 rules and requirements adopted by
the ACTA.A compliant telephone cord and
modular plug, RJ11 USOC, is provided with
this product. It is designed to be connected to
a compatible modular jack that is also compli-
ant. See installation instructions for details.
The REN is used to determine the number of
devices that may be connected to a telephone
line. Excessive RENs on a telephone line may
result in the devices not ringing in response to
an incoming call. In most but not all areas, the
sum of RENs should not exceed five (
5.0).To
be certain of the number of devices that may
be connected to a line, as determined by the
total RENs, contact the local telephone com-
pany. For products approved after July 23,
2001, the REN for this product is part of the
product identifier that has the format
US:AAAEQ##TXXXX .The digits represented
by ## are the REN without a decimal point
(e.g., 03 is a REN of 0.3). For earlier products,
the REN is separately shown on the label.