Filter
Top Products
30 31
This telephone has 10 speed dial locations where you can assign telephone
numbers from the directory you wish to dial numbers by pressing and holding
the respective digits keys from idle mode.
Only one handset can access the speed dial locations at a time. If another
handset attempts to access the speed dial locations, the screen shows Not
available at this time.
Add a Speed Dial Number
1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select
Directory.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Speed dial.
3. Press <MENU/SELECT>, then <UP/DOWN> to select an empty speed
dial location.
4. Press <MENU/SELECT> to access the directory list, then press <UP/
DOWN> to select the desired directory entry.
5. Press <MENU/SELECT> to save. The name of the desired directory
entry appears in the selected speed dial location.
Note:
• If the directory is empty, when you press MENU/SELECT in step 4, the
screen shows Directory empty.
• If the speed dial location you selected is occupied, the new directory
entry you selected replaces the old one. Take caution not to replace
entries you do not wish to delete from the speed dial locations.
Dial the Speed Dial Number
• In idle mode, press and hold a dial pad key (0 through 9) to display
the desired speed dial entry. The handset automatically dials out the
displayed number.
- OR -
• Press <TALK OFF/CLEAR> within one second to stop dialing the
displayed number.
SPEED DIAL NUMBERS
Note: If the speed dial location you selected is empty, the screen shows the
speed dial list instead.
Delete the Speed Dial Number
1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select
Directory.
2. Press <MENU/SELECT>, then <UP/DOWN> to select Speed dial.
3. Press <MENU/SELECT>, then <UP/DOWN> to scroll to a speed dial
location.
4. Press <MUTE/X> to delete the selected speed dial location. A
conrmation tone sounds.
Note: Deleting the speed dial locations does not affect the entries in the
directory.
To dial from the base:
1. Set speed dial numbers in the handset Speed Dial locations 0-3.
2. Note the corresponding locations of the memory locations on the
base:
• Handset Speed Dial 0 - Base memory location M0
• Handset Speed Dial 1 - Base memory location M1
• Handset Speed Dial 2 - Base memory location M2
• Handset Speed Dial 3 - Base memory location M3
3. Press the base memory location you wish to dial; phone dials from the
base, using the base speakerphone.
SPEED DIAL NUMBERS