Filter
Top Products
24 25
Note: Press <TALK OFF/CLEAR> to exit the directory, call log history or
redial list and return to the call without dialing the displayed number.
Redial list
You can redial up to 20 of the last numbers called. If you have stored a name
in the directory to go with the number, the name will be displayed instead. The
most recent last number will display at the top of the redial list.
To Seview the redial list entry
1. In idle mode, press <RD/P> to access redial list
2. Press <UP/DOWN>, or press <RD/P> repeatedly to review the redial
list entry.
To Redial a Number from the Redial List
1. Follow the steps in the previous section.
2. Press <TALK ON/FLASH> or <SPEAKER> to dial the selected redial
number.
To Store a Redial Number into the Directory
1. Follow the steps in the section under “Review the redial list entry”
above.
2. Press <MENU/SELECT> twice, then use the keypad to edit the number
if necessary,
3. Press <MENU/SELECT> and use the keypad to enter the name
4. Press <MENU/SELECT> to save.
To Delete a Redial Number
1. Follow the steps in the section under “Review the redial list entry” on
the preceding page.
2. While reviewing a number in the redial list, press <MUTE /X> to delete
the selected entry. A conrmation tone sounds.
3.
USING YOUR PHONE
Find the Handset
You can use the handset locator feature to nd misplaced handsets.
To start the paging tone:
Press <FIND> on the telephone base. All the registered handsets will ring,
and the ** Paging** is ashing on handset screen.
To stop the paging tone:
• Press <TALK ON / FLASH>, <SPEAKER>, or any dial pad key (0-9 *, or
#) on the handset(s).
- OR -
• Press <FIND> on the telephone base or put the handset in the cradle.
Make an Internal Call
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
another handset and make conference calls.
Intercom Another Handset
1. In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select
Intercom.
2. Press <MENU/SELECT>:
• If you have two handsets, your handset screen shows Calling
other handset. The other handset rings and its screen shows
Other handset is calling.
• If you have more than two registered handsets, your screen shows
Intercom to: Use the dial pad keys to select the other handset.
Your handset screen shows Calling HANDSET X. The other
handset rings and its screen shows HANDSET X is calling.
3. The called handset rings. Press <TALK ON/FLASH> or <SPEAKER> on
the called handset to establish the internal call.
USING YOUR PHONE