Filter
Top Products
30
Part 68 of FCC Rules
Information
a) This equipment complies with Part
68 of the FCC rules and the require-
ments adopted by the ACTA. On the
bottom of this equipment is a label that
contains, among other information, a
product identifier in the format US:
AAAEQ##TXXXX. If requested, this
number must be provided to the tele-
phone company.
b) A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and require-
ments adopted by the ACTA. A compliant
telephone cord and modular plug, RJ11C
USOC, is provided with this product. It is
designed to be connected to a compat-
ible modular jack that is also compliant.
See installation instructions for details.
c) The REN is used to determine the
number of devices that may be connected
to a telephone line. Excessive RENs on a
telephone line may result in the devices
not ringing in response to an incoming
call. In most but not all areas, the sum of
RENs should not exceed five (5.0). To be
certain of the number of devices that may
be connected to a line, as determined
by the total RENs, contact the local tele-
phone company. For products approved
after July 23, 2001, the REN for this pro-
duct is part of the product identifier that
has the format US:AAAEQ##TXXXX.
The digits represented by ## are the
REN without a decimal point (e.g., 03 is
a REN of 0.3). For earlier products, the
REN is separately shown on the label.
d) If this telephone equipment causes
harm to the telephone network, the
telephone company will notify you in
advance that temporary discontinu-
ance of service may be required. But
if advance notice isn’t practical, the
telephone company will notify the
customer as soon as possible. Also, you
will be advised of your right to file a
complaint with the FCC if you believe
it is necessary.
e) The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of the equipment.
If this happens the telephone company
will provide advance notice in order for
you to make necessary modifications to
maintain uninterrupted service.
f) If trouble is experienced with this
telephone equipment, for repair or
warranty information, please contact
Clarity, 1-800-552-3368. If the equip-
ment is causing harm to the telephone
network, the telephone company may
request that you disconnect the equip-
ment until the problem is resolved.
g) This telephone equipment is not
intended to be repaired and it contains
no repairable parts. Opening the equip-
ment or any attempt to perform repairs
will void the warranty. For service or
repairs, call 1-800-552-3368.
h) Connection to party line service is
subject to state tariffs. Contact the state
public utility commission, public service
commission or corporation commission
for information.
REGULATORY COMPLIANCE