Filter
Top Products
E
N
G
L
I
S
H
21
E
N
G
L
I
S
H
Difficulty in Placing or Receiving Calls
• Move closer to the base and try
again.
• If moving closer does not work,
you may have lost the security
code.
• Reset code by placing the handset
back on the base for 5-10
seconds. (See Security Code
Section)
• Make sure you have selected the
correct dialing mode, tone or
pulse.
• Make sure the AC adapter is not
plugged into a wall outlet with
other appliances.
• Disconnect for 5-10 seconds then
reconnect. Place the handset back
on the base and reinsert the AC
adapter.
• Make sure the handset battery is
fully charged.
Troubleshooting
UG060205_C410_RevA.qxd 6/15/05 8:03 PM Page 21