Filter
Top Products
E
N
G
L
I
S
H
17
E
N
G
L
I
S
H
Lighted Key Pad
The key pad will light for fifteen (15)
seconds after removing from the base
when there is an incoming call. To
reactivate the feature while in standby or
in use, press any key.
Page / Handset Locator
To send a page signal from the base to
the handset, press the PAGE button located
on the base of the telephone. A series of
rings will sound from the handset.
To locate the handset if it is away from
the base, press and hold the PAGE button
for approximately five (5) seconds. A
series of rings will sound for approximately
sixty (60) seconds. Return the handset to
the base or press the TALK button to
cancel the page. Press TALK again to
return to standby mode.
40 Channel Operation
The C410 cordless telephone
automatically searches and selects the
clearest of 40 channels when it is being
used.
Security Code
The security code prevents your cordless
phone from being accessed by a phone
on a different line. Once the handset
battery is fully charged, the handset will
automatically select the code from over
65,000 combinations. The code is
changed every time the handset is
placed in the cradle.
If you have trouble with placing or
receiving calls, a lost security code may
be the cause of the problem. When this
occurs, the handset can no longer
communicate with the base. Reset by
placing the handset on the base for 5-10
seconds. If that does not work, unplug
the AC adapter from the wall outlet.
Disconnect the handset battery for 5-10
seconds, and then reconnect. Place
handset back on the base and then
reinsert the AC adapter.
Hearing Aid Compatibility
The handset has a special coil inside
of it to couple the sound to hearing aids
equipped with T-Switches/T-Coils.
Operating Your Telephone
UG060205_C410_RevA.qxd 6/15/05 8:03 PM Page 17