Filter
Top Products
16
Headset/Neck Loop Jack
A 2.5 mm jack is located on the top of
the of the telephone handset that can be
used in conjunction with a headset.
While in headset mode, the volume of
headset is controlled by the telephone.
The same 2.5 mm jack can be used for
neck loops, in conjunction with an
adapter to the 3.5 mm jack.
Ordering a Headset
In the event you wish to purchase a
headset for your C410, please con-
tact Plantronics at 1-800-544-4660
for location near you. We recom-
mend using the Plantronics M110
headset.
Flash
The FLASH button is activated to use
custom calling services such as Call
Waiting or Three Way Calling. Please
contact your local telephone company for
information on these services.
Mute
The MUTE button allows the user to conduct
a private conversation that you do not
want the person on the other end to
hear. While in the mute mode, the
MUTE
button will become RED and the
microphone in the handset is disabled.
Pressing the MUTE button again will
disengage the MUTE feature.
Redial/Pause
The RD/P button operates both the last
number redial and the pause feature.
Last Number Redial
The last number dialed (up to 32
digits) is stored in the redial memory
until another number is dialed.
To Use this Feature
1. Press the TALK button.
2. When you hear the dial
tone, press the RD/P button.
3. The phone will automatically
dial for you.
Pause Feature
A four (4) second pause may be
inserted into the speed dialing of
the telephone numbers. Press the
RD/P button at the required point
during storage of a number into
memory.
Operating Your Telephone
UG060205_C410_RevA.qxd 6/15/05 8:03 PM Page 16