17
English
FZ709E
DX SEEK
When the
[ ]
key is touched, search will be per-
forming in the direction of higher frequencies.
When the
[ ]
key is touched, search will be per-
formed in the direction of lower frequencies.
∗
When seek tuning starts, “DX SEEK” appears in
the display.
Step tuning
Touch the
[
]
/
[
]
key to perform manual tun
-
ing.
∗
If no operation is performed for more than 7 sec
-
onds, manual tuning is cancelled and the display
returns to the previous mode.
Quick tuning
Touch and hold the
[
]
/
[
]
key for 1 second or
longer to begin station tuning.
Radio function
You need to enter the TUNER OPTION to per-
form the Radio function.
Manual tuning
There are 2 ways available:
Quick tuning and step tuning.
When you are in the step Tuning mode, the fre
-
quency changes one step at a time. In the Quick
Tuning mode, you can quickly tune the desired
frequency.
1. Touch the
[ ]
key and select the desired band
(
FM or AM
)
.
∗
If is not lit in the display, touch and hold
the
[ ]
key for 1 second or longer.
is lit
in the display and manual tuning is now avail
-
able.
2. Tune into a station.
LOCAL SEEK
If the key is touched and held in position for 1
second or longer, local seek tuning will be en-
abled. Broadcast stations with good reception
sensitivity are selected.
∗
When local seeking starts, “LO SEEK” appears in
the display.
Radio Mode Operations
Preset memory function
Preset memory function can store up to 24 sta-
tions: Six stations for each of FM1, FM2, FM3,
and AM1.
TUNER OPTION
1 . During Tuner mode, touch the
[ ]
key to
switch to ADJ menu.
2 . Select “OPTION” in the menu to enter
Tuner Option mode.
3 . Slide along
[
]
slider or touch
[
]
/
[
]
key, the TUNER OPTION mode changed
as following order:
“P.CH MEMORY
”
(
“PTY”
“PTY SELECT
” “AF” “REG”
)
“LANGUAGE” “PRESET SCAN”
“AUTO STORE” “P.CH MEMORY”...
Notes:
Items in bracket
(
PTY, PTY SELECT, AF, REG
)
are called Radio Data System Adjustment
mode. Please refer to page 20 for Radio Data
System Adjustment mode.
“PTY SELECT” only available when “
PTY” is
on.
“
REG” only available when “AF” is on.
Manual memory function
3 - 1 .
Select “P.CH MEMORY”.
3 - 2 .
Touch
[ ]
key to enter detail setting stage.
3 - 3 .
Slide along
[
]
slider or touch
[
]
/
[
]
key to select the preset channel number to
be stored.
3 - 4 .
Touch
[
ENT
]
key for 2 seconds to store the
frequency into the selected preset channel.
3 - 5 .
“MEMORY” is displayed for 2 seconds before
revert to main display.