Filter
Top Products
2-7
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8148-01
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Providing Power to the Phone
Power Outage
Your accessibility to emergency service through the phone is dependent on the
phone being powered. If there is an interruption in the power supply, Service and
Emergency Calling Service dialing will not function until power is restored. In the
case of a power failure or disruption, you may need to reset or reconfigure
equipment before using the Service or Emergency Calling Service dialing.
Obtaining Additional Information about Power
For related information about power, refer to the documents shown in Table 2-3.
These documents provide information about these topics:
• Cisco switches that work with the Cisco Unified IP Phone 7970 Series
• The Cisco IOS releases that support bidirectional power negotiation
• Other requirements and restrictions regarding power
Table 2-3 Related Documentation for Power
Document Topics URL
PoE Solutions http://www.cisco.com/en/US/netsol/
ns340/ns394/ns147/ns412/networking
_solutions_package.html
Cisco Catalyst Switches http://www.cisco.com/univercd/cc/td/
doc/product/lan/index.htm
Integrated Service Routers http://www.cisco.com/en/US/products
/hw/routers/index.html
Cisco IOS Software http://www.cisco.com/en/US/products
/sw/iosswrel/products_ios_cisco_ios_
software_category_home.html