Filter
Top Products
Cisco MDS 9000 Family Configuration Guide
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Chapter 35 Configuring iSCSI
Configuring iSCSI
Displaying iSCSI Information
Displaying iSCSI Interfaces
Example 35-1 Displays the iSCSI Interface Information
iscsi4/1 is up
Hardware is GigabitEthernet
Port WWN is 20:cf:00:0c:85:90:3e:80
Admin port mode is ISCSI
Port mode is ISCSI
Speed is 1 Gbps
iSCSI initiator is identified by name
Number of iSCSI session: 0 (discovery session: 0)
Number of TCP connection: 0
Configured TCP parameters
Local Port is 3260
PMTU discover is enabled, reset timeout is 3600 sec
Keepalive-timeout is 60 sec
Minimum-retransmit-time is 300 ms
Max-retransmissions 4
Sack is enabled
QOS code point is 0
Maximum allowed bandwidth is 1000000 kbps
Minimum available bandwidth is 70000 kbps
Estimated round trip time is 1000 usec
Send buffer size is 4096 KB
Congestion window monitoring is enabled, burst size is 50 KB
Configured maximum jitter is 500 us
Forwarding mode: store-and-forward
TMF Queueing Mode : disabled
Proxy Initiator Mode : disabled
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
Input 0 packets, 0 bytes
Command 0 pdus, Data-out 0 pdus, 0 bytes
Output 0 packets, 0 bytes
Response 0 pdus (with sense 0), R2T 0 pdus
switch(config-if)#
switch(config-if)#