Filter
Top Products
2-5
Getting Started with the Cisco IP Phone 7910 Series
78-11443-02
Chapter 2 Installing the Cisco IP Phone 7910 Series
Installing the Phone and Connecting to the Network
Figure 2-2 Using the Handset Rest
Step 7 If your system administrator asks you to auto-register your telephone, see the
“Auto-Registering Your Phone Using TAPS” section on page 2-6 for instructions.
1
Set the handset aside and use your thumb and finger to grasp and pull out
the square plastic tab in the handset rest.
2
Rotate the tab 180 degrees.
3
Slide the tab back into the handset rest with the extension protruding from
the top of the tab.
Replace the handset in the rest. The tab hooks into a slot in the handset to
ensure that the handset will not slip out of the rest.
1 2 3
77354