Filter
Top Products
10
Install the lock set on the phone
1. Put the security cable around a post or through a hole in the desktop. Insert the loops at the ends of the security cable
through the C-ring.
2. Insert the C-ring with cable loops through the slot on back of phone.
3. Use the combination lock to secure the ends of the C-ring around cable loops and phone.
The phone is secured to the desktop area.
4. To secure the desktop charger, use a laptop cable lock.
You can secure your Cisco Unified Wireless IP Phone 7921G Desktop Charger by using a laptop cable lock. The lock connects
to the security slot on the side of the desktop charger, and the cable can be secured to a desktop. The diagram shows where to
insert the lock.
Note The lock set does not include the cable lock.
181319
1
2
3
4