Filter
Top Products
Calling Features
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 8.0 (SCCP) 25
Place a Call with a Speed-Dial Button
(Cisco Unified IP Phone 6911 only.)
(Before you can use speed-dial buttons on your phone, you must set up speed dial on your User
Options Web pages.)
To place a call, press the Feature button enabled for speed dial.
Transfer
Transfer allows you to redirect a connected call from your phone to another number.
• You can redirect a single call to another number that you specify. Transfer is accomplished
differently depending on the phone model you have:
–
Hookflash is used to transfer calls from the Cisco Unified IP Phone 6901.
–
The Transfer button is used to transfer calls from the Cisco Unified IP Phone 6911.
• For Cisco Unified IP Phone 6911 only, you can connect two calls to each other (without remaining
on the line yourself).
Transfer a Call to Another Number Using the Hookflash
(Cisco Unified IP Phone 6901 only.)
1. Verify that you are on an active call (not on hold).
2. Press and release the hookswitch to get a dial tone.
3. Enter the transfer recipient’s phone number.
4. Wait for the recipient to answer. (Or, skip to Step 5. while the call is ringing.)
5. Hang up to complete the transfer.
Transfer a Call to Another Number Using the Transfer Button
(Cisco Unified IP Phone 6911 only.)
1. Verify that you are on an active call (not on hold).
2. Press the Transfer button .
3. Enter the transfer recipient’s phone number (or press a speed dial button).
4. Wait for the recipient to answer. (Or, skip to Step 5. while the call is ringing.)
5. Press the Transfer button again or hang up to complete the transfer.