Cellular Innovations HFBLU-LT100 Bluetooth Headset User Manual


 
4
3
This device has an internal, nonremovable, rechargeable battery. Do not attempt to
remove the battery from the device as you may damage the device.
1. Connect the charger to the correct outlet.
2. While the charger is connected, the red indicator light is
displayed during charging. If charging does not start,
disconnect the charger, plug it in again, and retry.
Charging the battery fully may take up to 2 hours.
3. When the battery is fully charged, the red indicator light
turns off. Disconnect the charger from the headset and
the wall outlet.
The fully charged battery has power for up to 5 hours of talk-time or up to 150 hours of
standby time. However, the talk and standby times may vary when used with different
mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and
environments.When battery power is low, the headset will remind you by beeps every 20
seconds, and the red indicator light will also flash.
1. For first time use, please charge the headset fully . If you cannot see the indicator
light when charging, please leave the headset charging for a while (Approx 15-35
Minutes), the indicator light will then illuminate.
2. If after a full charge, you cannot turn the headset on, please reconnect the headset
to the charger for a few seconds to activate it.
IMPORTANT NOTICE!
4
Charging the battery